UC6226 INS-EVK_GNSS Receiver Board Enclosures | GPS Enclosures EVK | GPS Devices| GNSS Devices | Products

Brief Introduction

The UC6226INS-EVK-Suite evaluation board is independently designed by Unicore Communications,Inc. (hereinafter referred to as Unicore). It is mainly used as a test and evaluation platform for the function and performance of the UC6226INS chip, which is convenient for users to use quickly and conveniently. The UC6226INS chip is designed with a 28nm process and a clever PMU design. It combines low power consumption with minimal miniaturization to significantly enhance the endurance of the user equipment. The UC6226INS is packaged in a QFN40 package that complies with the specifications, built-in Flash, and supports firmware upgrades.

Performance Specification

C/N0(-130dBm)	GPS：40.25dB	Autonomous	2.0m CEP
C/N0(-130dBm)	BDS：38.51dB	D-GNSS	<1.0m CEP
Power	tracking：28mW	Power	VDD_IO=3.3V
Consumption	V_DCDC_IN=3V	Consumption	24mW
Consumption	capturing：60mW	Consumption	V_Core=1.2V capturing ：52mW
TTFF	cold start< 29s	Sensitivity	capturing：-148dBm
	hot start< 1s		tracking：-162dBm
	re-acquisition< 1s		re-acquisition：-160dBm
	AGNSS < 2s		hot start：-154dBm

Interface Specification

DC/12V Power	12V power supply for EVK when VSEL jumper cap selects 3a
USB	Work as USB power and communication port when VSEL jumper cap selects 3b
VSEL	Power supply mode selection
Status LED	When the EVK is powered on, the light is always on. When the chip is successfully positioned, the light is blinking.
ANT	RF signal input
CFG	Jumper cap used to control the chip power on and off
UART	Serial port communication